SHANDONG VINSON MACHINERY CO.,LTD
Tel: 0086-535-6511737
Fax: 0086-535-6513072
Skype: sdwin66
Mobile & Whatsapp: 0086-18615022312
Email: sales1@zmmachinery.com
Address: No. 55-1, Zhichu Raod, Zhifu District, Yantai City, Shandong, China
Fax: 0086-535-6513072
Skype: sdwin66
Mobile & Whatsapp: 0086-18615022312
Email: sales1@zmmachinery.com
Address: No. 55-1, Zhichu Raod, Zhifu District, Yantai City, Shandong, China
current location：home>>News>>Company news
How to use belt filter press
1, the order of device startup. The correct opening sequence is: first open the belt filter press the pressure system, the filter plate in the pressure state, forming a closed filter room, and then go to open the feed valve, the filtrate into the device, until the filter When the liquid is filled with the filter chamber of the entire equipment, then the drain valve is opened and the filtered liquid is discharged. This will prevent the device from filtering in the case of an empty filter, so that it will not cause damage to the equipment.
2, the placement of the filter cloth. Filter cloth is a positive and negative difference, if the filter cloth against the anti-anti-anti, although the same can be filtered, but may be in the unloading cake, it will not easily separate, or fall off completely. So, when I put the filter cloth, be sure to filter cloth front and the initial filter contact, so that the filter cloth on the opposite side of the filter plate, and the filter cloth firmly fixed on the filter plate, the filter cloth Stretched tied tightly tied together, is to prevent the filter cloth due to the expansion of the cake squeeze, and retract the filter cake to go, again the full effect of filtration equipment failure.
Effectively improve the vacuum belt filter in the production efficiency
Filter cloth of vacuum filter before the replacement of the preparatory work
