• Company news

current location：home>>News>>Company news

Operation of the belt filter

We will be in the operation of the filter when there will be some problems, then how to try to avoid the problem? Here to introduce the operation of the filter under the precautions, I hope to help you.
    1. Before starting the motor, check that the voltage and motor wiring voltage is correct to prevent errors.
    2. Before starting the motor, tighten the dosing valve and then open the exhaust valve, so that the gas from the catheter into the dosing tank.
    3. Before use must first check whether the inlet and outlet piping has been installed, and the inlet and outlet pipe fixed in the tank, so that the entrance is not easy to swing. The same time as the above-
    4. After the above operation is completed, start the pump motor to start operation, should pay attention to whether the direction of pump operation is correct. The same time as the above-
    5. Filter before use, first check the pressure gauge diaphragm is filled with water, please fill the water and then lock the pressure gauge to maintain the correctness of the pressure gauge.
    6. Open the exhaust valve and then open the valve, the water from the dosing tank into the pump through the tank and the inlet tube, so that the inlet tube filled with liquid, or open the filter cover to remove the cover, the water Injected from the cartridge, so that the inlet tube filled with liquid.

Technical Improvement of Flocculation Device for Vacuum Belt Filter
The structure of the vacuum filter frame