• Company news

current location：home>>News>>Company news

Disposal of sludge dewatering machine

1. Loosen and remove the bolts on each hood, open the upper cover of the solid-liquid collection chamber, flip over, lift the motor and the differential guard.
2, disconnect the feed pump feed pipe connecting the flange bolts to separate.
3, loosen the bolts on the cover of the feed header and withdraw the feed tube. Note: At this point to note the relative position between the feed tube and the tube seat, can be a mark or measure the size and record.
4, remove the motor and drum belt pulley on the belt, beware of folder.
5, pull out the positioning pin on the bearing, remove the bolt, disengage tubing and the sensor connection.

The characteristics of frequency converter in press dewatering machine
What is the classification of sludge in the belt filter press?