• Company news

current location：home>>News>>Company news

Analyze the wear factors of belt sludge dewatering machine

We should be in the daily life of the belt sludge dewatering machine should be reasonable and effective maintenance and maintenance, to prevent the occurrence of belt sludge dewatering failure, today for everyone to bring the belt sludge dewatering machine wear factors:
1, tile surface corrosion: spectral analysis found that non-ferrous metal element concentration anomalies; iron spectrum showed a lot of non-ferrous metal components of sub-micron wear particles; lubricants moisture exceeded, acid value exceeded.
2, journal surface strain: iron in the iron cutting abrasive particles or black oxide particles, metal surface exists tempering color.
3, the nominal corrosion of the neck: spectral analysis found that the iron element concentration is strange, there are many iron in the iron composition of submicron particles, lubricating oil or excessive acid value exceeded.
4, surface strain: iron found in the cutting abrasive, abrasive composition of non-ferrous metals.
5, tile back fretting wear: spectral analysis found that iron concentration anomalies, iron spectrum in many iron components submicron wear particles, lubricating oil moisture and acid value anomalies. In the liquid lubrication conditions, the sliding surface is left out of the lubricating oil without direct contact, but also can greatly reduce the friction loss and surface wear, oil film also exists a certain vibration absorption capacity.

Sludge dewatering machine when parking precautions
Technical advantages of deep dewatering sludge