• Company news

current location：home>>News>>Company news

Belt sludge filter press weekly inspection work

In the use of belt sludge filter press in the process, the need for its continuous inspection and maintenance, in order to ensure that the belt filter filter in the use of the process, to normal operation, belt sludge filter press Can be carried out daily, weekly, monthly inspection, the following Xiaobian for everyone to analyze the belt sludge filter press weekly inspection work:
1, sludge metering pump, flocculant metering pump, filter pump part
(1) Check the sludge metering pump, flocculant metering pump and drive part to solve the water leakage (mud) and the drive device is not normal.
(2) check the filtrate pump water and water leakage situation.
(3) cleaning flocculant mixing and dilution equipment; cleaning flocculant diffuser (if used).
2, air compressor part
(1) check the air compressor oil level, insufficient when enough.
(2) discharge condensate from the tank.
(3) Clean the air filter.
(4) manually check the air compressor safety valve function.
3, filter press
(1) All rolling bearings are filled with calcium or lithium grease.
(2) transmission gear plus calcium-based grease.
(3) clean the guide roller slide, filling grease.
(4) Belt guide and tension cylinder bracket and U-ring ring plus lubricating oil.
(5) Check the drainage tank and pressure zone of the filter tank and bottom tank, flush the deposited sludge.
(6) Check the rubber seal on each axis of rotation and reset it if necessary.
(7) check the filter belt situation.

What is the installation and debugging of the filter press?
Performance advantages of sludge filter press