• Company news

current location：home>>News>>Company news

Daily use of belt filter press to pay attention to the problem

1, belt filter press rinse water needle running for a period of time after the phenomenon of congestion flushing needle occurs when the block is caused by the belt filter press muddy effect, running mud and other phenomena the main reason.
Solve flushing water needle blockage:
(1) Remove the cleaning brush by removing the water jet cleaning head, and turn on the washing water; (2) Raise the height of the cleaning water pump in the clean water tank to prevent the bottom sediment from being drawn into the blocking nozzle;
2, filter pneumatic valve repair and maintenance Air compressor produces compressed air containing more oil and water, likely to cause the valve deflection, leakage, pneumatic triad over-pressure reduction and the cylinder two five-pass Valve does not work and so on. Therefore, the quality of compressed air is the key to the stable operation of sludge filter press. The solution to this problem is simple. Install a gas dryer at the air outlet of the air compressor or install a gas filter at the inlet of the air tank. Frequently drain the water and check the pressure difference of the air filter to timely replace the filter.
3, concluded
The use and maintenance of belt filter press is crucial, and the daily use and maintenance of the equipment is also the key to the service life of belt filter press.

Analysis of improvement points of new sludge dewatering machine
型号说明与基本参数 Model description and basic parameters of vacuum belt filter