Application of Belt Filter Press in Sludge Treatment in Brewery-filter press丨vacuum belt filter丨belt press丨sludge dewatering-SHANDONG VINSON MACHINERY

Company news

SHANDONG VINSON MACHINERY CO.,LTD

Tel: 0086-535-6511737
Fax: 0086-535-6513072
Skype: sdwin66
Mobile & Whatsapp: 0086-18615022312
Email: sales1@zmmachinery.com
Address: No. 55-1, Zhichu Raod, Zhifu District, Yantai City, Shandong, China

Company news

current location：home>>News>>Company news

Application of Belt Filter Press in Sludge Treatment in Brewery

It is understood from now that the belt filter press is widely used in the sludge treatment of breweries. Generally, the breweries use the belt filter press to treat the excess sludge. The flocculant generally uses strong cationic polyacrylamide and has a molecular weight of 9 million. The above effects are more prominent, the dosage is relatively low, and the cost is relatively low. The water content of the mudcake pressed by the belt filter press is also relatively low.
To achieve the desired treatment results and to realize the harmonization of the environmental and economic benefits of brewery wastewater treatment, two or three technologies must be used in combination. This is the fundamental solution to the problem of beer wastewater pollution. For example, anaerobic and aerobic The treatment tank is used in tandem, relying on the former to reduce the high load of the waste water, and the latter to treat the low-concentration waste water up to the standard, and its power consumption can be compensated by the mass conversion of the previous process. In another example, the biological treatment is combined with the land use. It can effectively purify waste water, and it can also play a complementary role, resulting in higher economic benefits.

Sludge treatment is an important part of the sewage treatment project
How Flocculants Affect the Operation of Belt Filters