• Company news

current location：home>>News>>Company news

How does the additive affect the operation of the belt filter?

Chemical additives are chemical additives used in a certain industry. They generally contain metal processing aids, plastic additives, paper additives, building additives, water treatment additives, paint additives, leather additives. , additives for the electronics industry, textile auxiliaries, wood additives, etc.
Paint additives are broadly divided into:
Brightener, dispersant, conductive agent, curing agent, drier, toughening agent, emulsifier, thickener, antifoaming agent, leveling agent, anti-skinning agent, matting agent, light stabilizer, anti-fungal agent , antistatic agents, etc.
In our belt filter industry, there are also additives. What is the effect of the additives on the operation of the belt filter? The liquid medium treated by the belt filter is not only highly accurate, but also retains the medium. Nature of its own. However, when dealing with solid solutions and titanium solutions with more colloidal magazines, it is necessary to add an appropriate amount of filter aid to the belt filter. Otherwise, it is easy to cause the residue to block the channel and affect the efficiency of equipment processing.
When adding an auxiliary agent to the belt filter, the concentration of the auxiliary agent should be configured in advance. Then, the suspension is pumped into the main pipe by a dose adding pump according to a certain stroke, and evenly mixed with the titanium liquid before entering the device. This will cause the added additive to be uniformly mixed with the suspended solids and colloidal impurities in the titanium liquid to deposit on the surface of the pre-coating or filter cake, and continuously stroke a new level, which helps to maintain the good performance of the equipment. . In addition, the amount of different additives added has a very large influence on the pressure of the same titanium solution when it is processed, and the length of the entire treatment cycle. When the amount added is insufficient, the pressure value will rise rapidly, and the excessive addition will also cause the pressure to be slow. So when adding, be sure to use it proportionally.

Vacuum filter drainage tape slipay inspection
Installation procedure of belt vacuum filter