• Company news

current location：home>>News>>Company news

Vacuum belt filter start operation process

Vacuum belt filter before starting the operation should first check the equipment condition, to determine the normal, the following order to start the various parts of the motor:
1. Start the belt motor → start the stirring motor, then turn on the governor power switch, adjust the motor speed to the appropriate speed by rotating the speed control knob → start the spindle motor, adjust the motor to the appropriate speed → start the lubrication motor.
2. After the vacuum belt filter is operating normally, the slurry is fed into the tank until overflow occurs.
3. Then turn on the vacuum and anti-blowing pipe, began to filter work.

Resulting in vacuum belt filter slide short cause
Vacuum Belt filter precautions